25tph Clinker Cement Limestone Mining Slag Grinding Ball Mill
Cement ball mill Usage and application:
The cement ball mill is the key equipment for re-grinding cement clinker after pre-grinding by system ingredients. It plays a vital role in the cement production line and cement production process. Cement mills are mainly used in cement, silicate products, new building materials, refractory materials, glass ceramics, and other production industries.
Cement ball mill Working principle:
When the cylinder of the cement grinding ball mill rotates driven by the transmission gear, under the inertial centrifugal force, the grinding media will stick onto the lining board on the internal wall of the cylinder of the grinding mill and rotate together with the cylinder. The grinding media are brought to a certain height, and then fall down under the gravity, and during this process, the grinding media will crush the materials inside the cylinder, and at the same time the grinding media repeatedly move up and down inside the rotating grinding mill and will have sliding and rolling movement, so that the grinding media, the lining board and the materials to be ground will grind with each other, so that the materials are crushed to a finer granularity.
Cement ball mill Features:
Using advanced process design, the cylinder is tightly sealed to ensure dust overflow during operation.
The cylinder is cast with high-quality steel to extend the service life.
The good effect of saving energy, strong durability, low cost of grinding
The machine output can be increased by 15-20% compared with the general cement mill. the power consumption is reduced by about 10%
Cement ball mill Technical specifications:
| Specification (m) |
Capacity (t/h) |
Rotating speed (r/min) |
Grinding body (t) |
Motor |
Reducer |
Weight (t) |
| Model |
Power (kW) |
Model |
Speed ratio |
| Φ1.2x4.5 |
1.4 |
30.3 |
5 |
YR250M-6 |
55 |
ZD30-8 |
4.481 |
13.1 |
| Φ1.5x5.7 |
3.5 |
26.34 |
11 |
JR127-8 |
130 |
ZD40-7 |
4 |
25 |
| Φ1.83x6.4 |
6 |
23.9 |
18 |
JR137-8 |
210 |
ZD60-8 |
4.5 |
35.3 |
| Φ1.83x7 |
6.5 |
24.5 |
20 |
JR138-8 |
245 |
ZD60-8 |
4.5 |
37.2 |
| Φ2x9 |
9.5-10 |
23.88 |
31 |
JR158-8 |
380 |
ZD70-8 |
4.5 |
58.4 |
| Φ2.2x6.5 |
11 |
21.4 |
30 |
JRQ158-8/YR630-8 |
380 |
ZD70-9 |
5 |
46.2 |
| Φ2.2x6.5 |
14 Closed circuit |
21.4 |
30 |
JRQ158-8/YR630-8 |
380 |
ZD70-9 |
5 |
46.2 |
| Φ2.2x7 |
12 |
21.4 |
30 |
JR158-8 |
380 |
ZD70-9 |
5 |
54 |
| Φ2.2x7.5 |
13 |
21.4 |
32 |
JR158-8 |
380 |
ZD70-9 |
5 |
63 |
| Φ2.2x8 |
14 |
21.4 |
37 |
JR158-8 |
380 |
ZD70-9 |
5 |
65 |
| Φ2.2x9.5 |
14-16 Closed circuit |
21.4 |
43 |
JR1510-8 |
475 |
ZD70-9 |
5 |
70 |
| Φ2.2x13 |
16 |
20.3 |
55 |
YR630-8/1180/Y100L-8 |
630/11 |
JD630/ZS82.5-7 |
6.3/99.96 |
114.4 |
| Φ2.4x7 |
14-16 Closed circuit |
20.4 |
36 |
JR1510-8 |
475 |
JDX450 |
5 |
67.9 |
| 02.4x8 |
16-17 Closed circuit |
20.3 |
41 |
JR1512-8/Y180L-8 |
570/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
87.2 |
| Φ2.4x9 |
17-19 Closed circuit |
20.3 |
46 |
YR630-8/1180/Y100L-8 |
630/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
93.5 |
| Φ2.4x10 |
18-19 Open circuit |
20.3 |
50 |
YR630-8/1180/Y100L-8 |
630/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
99.4 |
| Φ2.4x11 |
19-21 Open circuit |
20.3 |
60 |
YR630-8/1180/Y100L-8 |
630/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
99.4 |
| Φ2.4x12 |
25-27 Closed circuit |
20.3 |
61 |
YR800-8/1180/Y100L-8 |
800/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
112.7 |
| Φ2.4x13 |
25-27 High fine open circuit |
20.3 |
66 |
YR800-8/1180/Y100L-8 |
800/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
131.1 |
| Φ2.4x13 |
21-23 Open circuit |
20.3 |
66 |
YR1000-8/1180/Y160M-4 |
1000/11 |
JD630/ZS82.5-7 |
6.333/99.96 |
130.4 |
| Φ2.6x10 |
25-27 Closed circuit |
20.3 |
60 |
YR800-8/1250 |
800 |
JD800 |
5.5 |
150.5 |
| Φ2.6x13 |
27-29 |
19.1 |
80 |
YR1000-8/1180/Y160M-4 |
1000/11 |
|
5.5/280 |
169 |
| Φ3x9 |
33-34 Closed circuit |
19.6 |
79 |
YR1000-8/1180/Y160M-4 |
1000/11 |
NAL108/8/ZS110-19 |
8/280 |
156.5 |
| Φ3x9 |
36.5 Closed circuit |
17.6 |
79 |
YR118/61-8 |
1000 |
2x1250 |
42.163 |
121.13 Without motor |
| Φ3x11 |
35-40 Closed circuit |
18.3 |
97 |
YR1250-8/1430/YR160M-4 |
1250/11 |
YNL1210 |
6.3 |
178 |
| Φ3x11 |
47 Closed circuit |
17.7 |
97 |
YR118/74-8 |
1250 |
ZI314 |
42.39 |
169 |
| Φ3x12 |
38-40 Closed circuit |
18.1 |
90 |
YR1250-8/1430 |
1250/11 |
JS1100-00 |
41.27 |
196.26 |
| Φ3.2x11 |
40 Closed circuit |
18 |
103 |
YR1400-8/1430/Y160M-4 |
1400/11 |
YNL1210/ZS110-19 |
12.35/28 |
186.1 Without motor |
| Φ3.5x11.5 |
65-70 Closed circuit |
16.5 |
129 |
TYD143/49-8 |
2000 |
ZI370 |
36.239 |
138.3 Without motor |
| Φ3.5x11.5 |
50 Closed circuit |
17.2 |
126 |
YR1800-8/1430/Y200L2-2 |
1800/37 |
|
43.02/318 |
252.27 |
| Φ3.8x13 Double slipper |
70-75 Closed circuit |
16.6 |
170 |
YRKK800-8 |
2500 |
JS130/MFY250 |
44.9 |
203 Without motor |
| Φ3.8x13 |
60-62 |
16.3 |
170 |
YR2500-10/1730 |
2500 |
MFYX250 |
|
286 |
| Φ4x13 |
65 Closed circuit |
15.95 |
202 |
YRKK900-8 |
2800 |
JS130-8 |
46.7 |
264 |
| Φ4.2x13 |
85 Closed circuit |
16.3 |
224 |
YRKK900-8 |
3150 |
MFY320 |
47.8 |
250 Without motor |
Cement ball mill customer case :
Cement ball mill delivery :
Manufacturing Facilities:
After-sales service:
1.Free repair and replacement
Within the warranty period, if the equipment malfunctions in the correct use, we will guarantee free repair and replacement of spare parts.
2.Supply spare parts
During the normal service life of the equipment, we will provide spare parts with reliable quality and reasonable price.
3.Remote diagnosis and on-site service
When the equipment malfunctions, our after-sales service engineers can diagnose the equipment by video and guide the on-site operators to troubleshoot the equipment. If the equipment fault still cannot be removed, We will arrange professional after-sales service engineers to remove the fault on site.
){kind=link}