| Customization: | Available |
|---|---|
| Model: | Φ2.8×24 |
| Object: | Sand |
Suppliers with verified business licenses
gypsum powder kiln dry machine use the new-type raising plate, which has the functions of guiding, even flow, raising materials etc.
The raising plate can make the materials be distributed uniformly to the cross profile in the dryer machine. The material curtain is at the state of thin, even and complete, with completely touching with the hot air flow to reach the purpose of making full use of the heat energy.
The consumption of coal and electricity of the dryer in our company can be lower 10% to 15% than the normal dryers, with the production ratio higher than 10% to 15%.
Mainly used in:
1. Chemical, miner, metallurgical and other industries, such as ore, slag, coal, metal powder, clay, diatomaceous earth, kaolin.
2. Agriculture, feed, fertilizer industry, such as straw, pasture, leaves, fish meal, corn sauce, starch residue, distiller's grains, dregs, pomace, soy sauce residue, bagasse, peat, organic compound fertilizer, sludge, aquatic products Waste, food factory waste, slaughterhouse waste, organic fertilizer, inorganic fertilizer, ammonium phosphate.
3. Drying powdery or granular materials with special requirements. Such as various crystals, light calcium carbonate, activated clay, magnetic powder, graphite, inorganic mud, clay, lime slurry, ore mud, phosphate slag, aluminum plant red mud.
The heat source of Dryer Machine is coming from burning device, with this type of dryer adopting the heat ways of concurrent flow. Thus, the materials should be added from the feeding box and the feeding gutter to the cylinder.
Since the dryer is put slantly, some of the materials are flowing to the trailing end under the gravity and the rotary force, other materials are risen by the shoveling plate over and over again to the upper and then being scattered to form an even curtain.
| Spec./m (Dia.×Length) |
Shell Cubage (m³) |
Capacity (t/h) |
Installation Obliquity (%) |
Highest Inlet Air Temperature (ºC) |
Main Motor (kw) |
Weight (t) |
| Φ1.2×8.0 | 9.0 | 1.9~2.4 | 3~5 | 700~800 | 7.5 | 9 |
| Φ1.2×10 | 11.3 | 2.4~3.0 | 3~5 | 700~800 | 7.5 | 11 |
| Φ1.5×12 | 21.2 | 4.5~5.7 | 3~5 | 700~800 | 15 | 18.5 |
| Φ1.5×14 | 24.7 | 5.3~6.6 | 3~5 | 700~800 | 15 | 19.7 |
| Φ1.5×15 | 26.5 | 5.7~7.1 | 3~5 | 700~800 | 15 | 20.5 |
| Φ1.8×12 | 30.5 | 6.5~8.1 | 3~5 | 700~800 | 18.5 | 21.5 |
| Φ1.8×14 | 35.6 | 7.6~9.5 | 3~5 | 700~800 | 18.5 | 23 |
| Φ2.2×12 | 45.6 | 9.7~12.2 | 3~5 | 700~800 | 22 | 33.5 |
| Φ2.2×14 | 53.2 | 11.4~14.2 | 3~5 | 700~800 | 22 | 36 |
| Φ2.2×16 | 60.8 | 13.0~16.2 | 3~5 | 700~800 | 22 | 38 |
| Φ2.4×14 | 63.3 | 13.5~16.9 | 3~5 | 700~800 | 37 | 45 |
| Φ2.4×18 | 81.4 | 17.4~21.7 | 3~5 | 700~800 | 37 | 49 |
| Φ2.4×20 | 90.4 | 19.3~24.1 | 3~5 | 700~800 | 45 | 54 |
| Φ2.4×22 | 99.5 | 21.2~26.5 | 3~5 | 700~800 | 45 | 58 |
| Φ2.6×24 | 127.4 | 27.2~34.0 | 3~5 | 700~800 | 55 | 73 |
| Φ3.0×20 | 141.3 | 30.1~37.7 | 3~5 | 700~800 | 75 | 85 |
| Φ3.0×25 | 176.6 | 37.7~47.1 | 3~5 | 700~800 | 75 | 95 |
| Φ3.2×25 | 201 | 42.9~53.6 | 3~5 | 700~800 | 90 | 110 |
| Φ3.6×28 | 285 | 60.8~76.0 | 3~5 | 700~800 | 160 | 135 |
){kind=link}