Iron Ore Sand Making Equipment Cobblestone Multi-Cylinder Hydraulic Cone Crusher

Product Description

Iron Ore Sand Making Equipment Cobblestone Multi-Cylinder Hydraulic Cone Crusher

There are 4 different types of cone crushers, including the single-cylinder cone crusher, multi-cylinder hydraulic cone crusher, hydraulic cone crusher, compound cone crusher, also named Symons cone crusher.The crushing cavity is decided by the crushing purpose of ore. The standard model is suitable for medium crushing process, the medium model is suitable for fine crushing process, and the short head model is suitable for fine crushing process.Cone crushers are widely used in the secondary, fine and ultra-fine crushing processes, researched and developed by adopting the world's most advanced crushing technology, integrating mechanics, hydraulics, electric, intelligent control and other technologies together.
Multi cylinder hydraulic cone crusher Working principle:
Multi-cylinder hydraulic one crusher is a compression type of stone crusher. The feeding rock is crushed by squeezing or compressing the feed material between a wear resistant mantle and a manganese concave or a bowl liner. The whole working process of HPC multi-cylinder hydraulic cone crusher is that motor drives the rotation of transmission shaft by belt pulley and v-belts, then transmission shaft drives the rotation of eccentric sleeve around the main shaft through the spiral bevel gear, squeezing or compressing the materials continuously. The material is crushed from all directions, crushed and grinded according to their own grain, which formed the high compressive strength building aggregates. The materials are small enough to fall through the narrow opening at the bottom of the crusher. Final sizing and reduction is determined by the closed side setting or the gap between the two crushing members at the lowest point

Multi cylinder hydraulic cone crusher Features:
1. The crushing cavity is special designed according to particles-layer- pressure principle. The special cavity and the suitable rotary speed improve crushing ratio and capacity, so does the cubic product percentage.
2. With hydraulic protection and hydraulic cavity cleaning, the machine is high-automatic. If something abnormal happens, such as iron is fed into the crushing cavity or there is a jam in the cavity, the machine will lift up the cover and discharging the materials automatically. This eliminates the trouble of stopping the machine to discharge the material by workers, so the maintenance is easier, the cost is lower than Spring Cone Crusher.
3. The mantle and bowl liner are made by high abrasion materials. The special design of crushing cavity and particles-layer- pressure protection decrease the abrasion, make the service time 30%-80% longer than traditional cone crusher.
4. It is adjusted by hydraulic device and lubricated by diluted oil. The labyrinth seal eliminates the defect of mixture between water and oil in the traditional Spring Cone Crusher.

Multi cylinder hydraulic cone crusher Main technical specifications:

Model	Cavity	Diameter of large end of crushing cone(mm)	Width of Feeding Opening(mm)	Max. feeding size (mm)	Adjusting Range of Discharge Opening (mm)	Processing capacity(t/h)	Main motor power(kw)
HPC200	C1	900	210	178	22~38	90-250	132-200
	C2		155	132	18~38
	C3		130	110	14~38
	F1		118	100	12~25
	F2		90	76	10~25
	F3		70	60	8~25
HPC300	C1	1100	235	200	26~45	110-440	180-250
	C2		211	180	20~45
	C3		135	115	16~45
	F1		124	105	14~25
	F2		96	82	12~25
	F3		70	60	8~25
HPC400	C1	1400	330	280	26~51	140-630	280-355
	C2		200	170	22~51
	C3		152	130	16~51
	F1		135	115	12~25
	F2		106	90	10~25
	F3		80	68	8~25
HPC500	C1	1500	335	285	32~51	175-790	355-450
	C2		229	190	25~51
	C3		180	152	19~51
	F1		152	130	13~25
	F2		124	105	10~25
	F3		88	75	8~25
HPC800	C1	2000	385	326	32~51	260-1200	550-630
	C2		350	298	25~51
	C3		280	238	16~51
	F1		160	136	13~25
	F2		120	102	10~25
	F3		90	77	8~25

cone crusher workshop :

In order to find the suitable models and design the best stone crusher plant or sand making line for you, pls kindly inform us the following information:
1.Which kind of material you are going to crush? Soft stone (dolomite, limestone) or hard stone ( granite, basalt, river pebble )? 
2. What's the max input size of the material? (In inch,centimeter or milimeter) 
3. What's the granularity of the final products you need? (in milimeter, micron or mesh) 
4. What's the production capacity you want? How many tons or cubic meters per hour?
5. You want only a Crusher, or a complete Crushing Production Line?